- DESIGN INTEGRITY
The UItra-DekŪ begins and ends in a high standing seam, reducing the
risk of leakage at the rake that can occur when finishing in the low. The
panel seam is sealed with a factory-applied hot-melt mastic, a superior grade
to mastics applied in the field.
- FLOATING ROOF
The Ultra-DekŪ roof was designed to cope with the forces of
expansion and contraction. This is accomplished by allowing the panels to
freely move up and down the roof slope. Due to this design feature, the
system offers no diaphragm capabilities or purlin stability.
- CLIP SELECTION
A large selection of clips is available for various types of
construction. The articulating clip eliminates the binding and friction
during panel expansion and contraction caused by a misformed, misaligned or
improperly erected substructure. The clip provides a 3/8" clearance at
the purlin to reduce water ponding on low pitch roofs. Constructed from 12
gauge material, this clip is an integral part of maintaining panel module
within the floating system.
- UL CLASS 90 RATING
The UItra-DekŪ roof system has 10 different UL Class 90 construction numbers,
each of which are available with several options.
- FIRE RESISTANCE RATINGS
The roof system qualifies for use in several UL design assemblies and
carries a UL "Class A" fire rating.
- SIMPLICITY
No field seaming is required. The panels simply snap together
forming a self-locking seal.
- FLEXIBILITY
The Ultra-DekŪ roof system offers welcome flexibility to the erector.
Wall covering can be erected before or after the roof is installed. Panel
installation is an uninterrupted procedure.
- EASE OF INSTALLATION
The erector has the option to install each side of the roof separately
or both sides simultaneously, which greatly increases the speed and
convenience of erection. Being reversible end-for-end, sheets do not have to
be special ordered for each side of the building. No field notching of
panels at endlaps or ridge is required.
- FORGIVING SYSTEM
The Ultra-DekŪ system design allows for the roof to be finished in
the "high" when an out-of-square condition or other factors cause the roof to
terminate up to 4 from the steel line.
- BUILDING LENGTH
Odd, as well as even, footage buildings can be terminated in a major
rib with the use of our 12" and 18" panel or at other odd widths by field
bending the panel.
- PREPUNCHED PANELS AND COMPONENTS
A prepunched system, combined with self-engaging back-up plates, assures
panel module and speeds roof installation.
- DURABILITY
Every unpainted panel is manufactured from Galvalume PlusŪ, your assurance
of our commitment to quality.
-
COLOR AND FINISHES
Ultra-DekŪ is available in a wide variety of popular colors in three
different paint systems.
|
