Fastener #1

• Clip to purlin
• Eave plate to eave strut
• Inside closure to eave plate or eave strut
• Rake support to purlin (Fixed System Only)

1/4"-14x1" Driller
3/8" Hex Washer Head with 5/8" 0. D. washer   

Fastener #1E
• Panel to eave plate or eave strut
• Rake trim to roof panel
• Outside closure
• Endlap

1/4"-14 4x1 1/4 Long Life Self Driller
Hex Washer Head with
sealing washer
(Long life exterior fastener)   

Fastener #2A
• Use in place of Fasteners #1 E, #2B, and #4 at all stripouts

1 7x1 Type AB Long Life
3/8" Hex Washer Head with sealing washer
(Long life exterior fastener)   

Fastener #2B
• Endlap - Optional Detail (as shown on page UD-40)

1/4"-14x1" Type AB Long Life
3/8" Hex Washer Head
with sealing washer
(Long life exterior fastener)   

Fastener #4
• Ridge and other flashing to outside closure
• Gutter to panel
• Gutter to strap
• Trim to trim connections

1/4"-14x7/8" Lap Tek Long Life Self Driller
3/8" Hex Washer Head with sealing washer
(Long life exterior fastener)   

Fastener #5
• Rake support to purlin (Floating System Only)
• Floating eave plate to Eave strut

1/4"-14 4x1 1/4" Shoulder Tek 2
Hex Washer Head, no washer   

Fastener #6
• Clip to joist • Eave plate to beam • Rake support to joist • (Fixed System Only)

12-24x1 1/4" TEK 4.5
5/16" Hex Washer Head with
5/8" O.D. washer   

Fastener #7
• Rake support to joist (Floating System Only)
• Floating eave plate to joist

1/4"-20x1 1/4" Shoulder Tek 4
5/16" Hex Washer Head, no washer