Eave Plate, Low
(Optional)
 |
• 8-0 length
• 14 gauge painted
• Factory slots
• For use with low clips
HW-7600 |
|
Eave Plate, High
 |
• 8’-0" length
• 14 gauge painted Factory slots
• For use with high clips
HW-7610 |
|
Floating Eave Plate, Low
 |
• 8-0’ length
• For use with positive
Danel attachment - mid slope
HW-7601 |
|
Floating Eave Plate, High
 |
• 8'-0" length
• For use with positive
panel attachment - mid
slope
HW-7611 |
|
Rake Support, Low
 |
• 20'-0" length
• 14 gauge painted
• Factory slots
• For use with low clips
HW-7710 |
|
Rake Support, High
 |
• 20'-0" length
• 14 gauge painted
• Factory slots
• For use with high clips
HW-7720 U |
|
Rake Support, Utility
 |
• 20'-0" length
• 14 gauge painted
• Factory slots
• For use with utility clips
HW-7722 |
|
Cinch Strap* UItra~Dek®
(Optional-Endlaps)
(24", 18" or 12") |
• For use at endlaps-optional
• 16 gauge • For use at light transmitting panels — optional
• For use at roof curbs |
12" Cinch strap does not go over seam of panel.
* Protected by U.S. Patent No. 4,655,020
|
|
Back-up Plate*
(24, 18’ or 12")
12" Back-up plate is not prepunched.
* Protected by U.S. Patent No. 4,655,020 |
• For use at endlaps and at the
ridge
• Pre-punched
• gauge prepainted
HW-7740 (24")
HW-7742 (18")
HW-7744 (12")
|
|
Outside Closure
(24’, 18" or 12")
12" Closure has no minor ribs. |
• For use at ridge, roof
penetrations, etc.
• 24 gauge
HW-430 (24")
HW-432 (18’)
HW-442 (12") |
|
