|
ITEM |
DESCRIPTION |
PRICE PER 100 |
|
BEARING PLATE
 |
PART
NUMBER |
SSR
SYSTEM |
GAUGE |
FINISH |
WEIGHT
PER 100 |
0-500 |
501-1000 |
OVER
1000 |
|
HW-7500
|
UD
& DL
BL & SLK |
16 |
Red
Oxide |
33.00# |
196.18 |
187.27 |
177.92 |
| For
use with all clips. |
|
|
UTILITY CLAMP
 |
PART
NUMBER |
SSR
SYSTEM |
MATERIAL |
WEIGHT |
PRICE PER EACH |
|
HW-562
|
UD,
DL, BL & SLK |
Aluminum |
.35# |
15.34 |
|
Note:
All loads imposed on S-5 clamp will be transferred to panels.
Panels must be adequately attached to building to resist these loads.
Do not use as a personal fall restraint device. Please see the load
chart on the back of the S-5 brochure in the Product Information
Section of this catalog or contact ASBC. |
|
UD WIND CLAMP
 |
PART
NUMBER |
SSR
SYSTEM |
MATERIAL |
WEIGHT |
PRICE PER EACH |
|
HW-568 |
UD |
Aluminum |
.10# |
2.90 |
Note: Use at Ultra-Dek®
clip locations to provide additional panel uplift capacity
Clamp usage to be determined by a registered
professional engineer |
|
SPACER TOOL
 |
PART
NUMBER |
SSR
SYSTEM |
LENGTH |
MATERIAL |
WEIGHT |
PRICE PER EACH |
|
HW-619 |
UD |
26" |
Aluminum |
1.28# |
10.79 |
|
SHAPING TOOL
 |
PART
NUMBER |
SSR
SYSTEM |
LENGTH |
HEIGHT |
WEIGHT |
PRICE PER EACH |
|
HW-600 |
UD |
N/A |
3'-0" |
5.00# |
30.67 |
|
Ultra-Dek® UNSEAMING TOOL
 |
PART
NUMBER |
SSR
SYSTEM |
WIDTH |
LENGTH |
WEIGHT |
PRICE PER EACH |
|
HW-7770 |
UD |
2 1/2" |
12" |
1.38# |
52.43 |
PANEL
HEMMING TOOL
 |
PART
NUMBER |
SSR
SYSTEM |
WIDTH |
HEIGHT |
WEIGHT |
PRICE PER EACH |
|
HW-602 |
BL
& SLK |
19" |
13
1/2" |
4.25# |
55.49 |
Signature is a registered trademark
of Metal Building Components, L.P Galvalume Plus is a registered and protected
trademark of BIEC International, Inc.
Consult the ASBC Technical Manual for proper product application, design,
details, and other product information. |
