COMMERCIAL / INDUSTRIAL PRICING

←Previous Page Next Page →

Page CP-32

Table of Contents
Gauge Width Finish Wt/Ft PRICE PER 10'-2" SHEET PRICE PER CLF COIL
1-10 11-50 Over 50 1-10 11-50 Over 50
26

42 3/4"

 Signature® 300 2.79#

Please Inquire

565.69

544.35

 523.67
26 42 3/4" Signature® 200 2.79# 52.70

50.71

 49.71

493.59

474.97

 456.65
26 42 3/4" Galvalume Plus® 2.79# 43.15

41.52

40.70

404.08

388.83

 371.20
26 42 3/4" Galvanized 2.90# 47.68

45.83

44.98

 446.64

429.78

 411.35
 
26 48 3/8" Signature® 200 3.11# 59.24 57.00 55.88 554.81 533.87 523.40
26 48 3/8" Galvalume Plus® 3.11# 49.67 47.79 46.85 465.15 447.60 428.82
24

42 3/4"

 Signature® 200 3.54#

63.28

60.89

59.69

592.71

570.35

 549.16
24 42 3/4" Galvalume Plus® 3.54# 53.80 51.77

50.75

503.90

 484.88 465.37
 
24 48 3/8" Signature® 200 4.00# 70.58 67.92 66.58 661.06 636.12 613.64
24 48 3/8" Galvalume Plus® 4.00# 60.88 58.58 57.43 570.20 548.68 537.92
22

42 3/4"

 Signature® 200 4.45#

77.17

74.26

72.80

722.84

695.56

 671.92
22 42 3/4" Galvalume Plus® 4.45# 65.62

85.94

 84.25 836.56 804.99 579.20
 
22 48 3/8" Signature® 200 5.04# 89.31 85.94 84.25 836.56 804.56 877.82
22 48 3/8" Galvalume Plus® 5.04# 74.25 71.44 70.04 695.49 699.25 646.12
Signature is a registered trademark of Metal Building Components, L.P. Galvalume Plus is a registered and protected trademark of BIEC International, Inc..
Consult the ASBC TECHNICAL MANUAL for proper product application, design details, and other product in formation.

NOTES:

  1. Add $108.00 set-up for coil orders less than 250L.F., 125L.F. minimum.
  2. Add $36.00 per coil for wood skid.
  3. Add $36.00 for flat sheet wood skid/Maximum 100 flat sheets or 3000# per skid. Maximum 14’ length.
  4. Add $52.00 for LTL crating/Maximum 100 flat sheets or 3000# per skid.
  5. Add $7.55 per square for embossing.
  6. All price quotes for coil are at theoretical weight only. All invoices will be priced at actual weight shipped.
  7. All coils are subject to ± 15% of quantity ordered.
  8. The camber tolerance for coils is one inch in any 20 feet.
  9. Strippable film available for flat sheets (except for Low Gloss Paint Finishing Systems) upon request. Add $.10 per square foot.
  10. Slitting available upon request - $9.75 per CLF - $300.00 minimum charge.
  11. Flat sheet lengths other than 10'-2" are available upon request. Minimum length 5’, maximum length 14'-0". For flat sheet lengths other than 10'-2" or 14'-0", add 10% per square foot. Flat sheet lengths over 14-0’ require special skid. Please inquire.
  12. All material is Grade D for flat sheets, Grade D or E for Coils.
←Previous Page Next Page→
Table of Contents