Table of Contents(Page DL-76)

Double-LokŪ DESIGN
TRIM DETAILS
SNOW GUTTER

NOTES:

  1. Attach gutter to eave plate with Fastener #14A (3 fasteners per 10' piece).
  2. Install gutter straps 3'-0" o.c.
  3. Apply Tri-Bead tape sealer to slope leg of gutter.
  4. Use minor rib tape sealer to fill voids in panel at minor ribs as shown on page DL-34.
  5. Install panel with Fastener #1 E at prepunched holes. Panel must not overhang into gutter.
  6. Front top edge of gutter must not project above the plane of the panel pan.

Back   Next