Table of Contents(Page DL-65)

Double-LokŪ SPECIAL ERECTION TECHNIQUES
GUIDELINES FOR INSTALLING REPAIR PANEL



CROSS SECTION VIEW OF REPAIR PANEL

 Remove ridge flash at damaged area. Remove outside closures from, and on each side of, damaged panel.

Apply triple bead tape sealer across width of panel 12" below the damaged area.

Repair panel has a 1/2" leg on one side and a 1" leg on the other side.

Install repair panel by sliding the 1/2" leg of the panel behind the seam of the existing panel. Repair panel must extend up slope behind outside closure.

Back   Next