|
SEAMING
OPERATION
|
CAUTION
It is critical that the panel
seams are crimped and folded as shown below before using the
electric seamer. Failure to follow these guidelines will result in
damaged seams. |
To begin seaming, set the hand tool on
the seam. Align the edge of the hand tool with the end of the panel.
Handles on hand tool should be vertical.
Pull handles apart to crimp female lip.
This should be done four times along the seam for a total of 24".
Return to the end of the panel to begin
the second stage. Set hand tool onto seam backwards from before. Handles
should be leaning away from open side of seam. Pull handles apart to
flatten seam. This should be done one time which produces a finished
6" long seam. The relationship of this
6" of finished seam to the 24" of crimped seam is critical to
the proper alignment of the rolls in the electric seamer.
|
CAUTION
Do not crimp panel seams at
clips. Damage to seams during electric seaminq will result. |
|
