Fastener #1
• Clip to purlin
• Eave plate to eave strut
• Inside closure to eave plate or eave strut
• Rake support to purlin (Fixed System Only)

1/4"-14X1" Driller 3/8" Hex Washer Head with 5/8" O.D. washer

Fastener #1 E
• Panel to eave plate or
eave strut
• Rake trim to roof panel
• Outside closure
• Endlap

1/4"-14x1 1/4" Long Life Self Driller 3/8" Hex Washer Head with sealing washer (Long life exterior fastener)

Fastener #2A
• Use in place of Fasteners #1 E, #2B, and #4 at all stripouts

17x1" Type AB Long Life 3/8"Hex Washer Head with sealing washer (Long life exterior fastener)

Fastener #2B
• Endlap Optional Detail (as shown on page DL-40)

1/4"-14x1" Type AB Long Life 3/8" Hex Washer Head with sealing washer (Long life exterior fastener)

Fastener #4
• Ridge and other flashing to outside closure
• Gutter to panel
• Gutter to strap
• Trim to trim connections

1/4"-14x7/8" Lap Tek Long Life Self Driller 3/8" Hex Washer Head with sealing washer (Long life exterior fastener)

Fastener #5
• Rake support to purlin
(Floating System Only)
• Floating eave plate to Eave strut

1/4"-14x1 1/4" Shoulder Tek 2 3/8" Hex Washer Head, no washer

Fastener #6
• Clip to joist
• Eave plate to beam
• Rake support to joist
• (Fixed System Only)

12-24x1 1/4"TEK4.5 5/16" Hex Washer Head with 5/8" O.D. washer

Fastener #7
• Rake support to joist
(Floating System Only)
• Floating eave plate to joist

1/4"-20x1 1/4" Shoulder Tek 4 5/16" Hex Washer Head, no washer